Typically, High Voltage Disconnect Switch systems have a set of devices to prevent errors when under load, to prevent the high-voltage disconnect switch from accidentally opening or closing while ener ...
If Powbinet uses an automatic switch with only an instantaneous or short-delay overcurrent release, the release's setting current should avoid short-term overload current to prevent equipment malfunct ...
After the Wall Switch socket is powered on, it is time to test it. At this point, you need to use a special tester. Insert the tester into the socket, then flip the switch and observe the power status ...
The price difference of Cold Shrink Cable Accessories is not only affected by the material, but also closely related to the specifications of the cold shrink cable accessories. Generally, the larger t ...
drop out fuse breaking capacity test: The synthetic circuit method is used to verify the ultimate breaking capacity to ensure that the product can still safely and reliably cut off the circuit under h ...
When High Voltage Disconnect Switch is used at various voltage levels, its main function is to change the circuit connection or to disconnect the line and the device from the power supply, thereby pro ...
When the distribution box uses an automatic switch to protect the distribution line, the Powbinet automatic switch plays a key role in line protection. Its overcurrent release should be installed on e ...
The Wall Switch power distribution board is not directly connected to the box. The moment the fuse is disconnected, a lot of heat will be generated, and there may even be metal debris or molten materi ...
Compared with heat-shrinkable cable accessories, the price of Cold Shrink Cable Accessories is much higher than that of heat-shrinkable cable accessories. This is mainly because the high-performance s ...
During the drop out fuse power frequency withstand voltage test, products of different voltage levels must meet the corresponding test standards. 12kV dropout fuses must withstand a withstand voltage ...
The special thing about High Voltage Disconnect Switch is that it cannot extinguish arcs and can only be operated when there is no load current. That is to say, the high-voltage disconnector can only ...
In the design and construction of power distribution lines, the selection of fuses to protect them is crucial. Fuses should be installed on each ungrounded phase and pole to ensure that power is promp ...
If you twist the lamp holder too hard during installation, it can easily cause the internal wires to become over-entangled. In other words, there are too many exposed wires, which can then touch the o ...
The primary factor determining the price of cable accessories is their material. There are two types of materials: PE and silicone rubber. PE is often referred to as heat-shrink cable accessories, whi ...
drop out fuse fuses must undergo infrared temperature measurement every quarter, using infrared imaging technology to monitor temperature changes at the contact joints. Contact temperature rises excee ...
The High Voltage Disconnect Switch not only serves as a clear disconnect and isolation function in power systems, but can also be used to switch certain circuits, thereby changing the system's operati ...
The electrical components used in the Powbinet must strictly comply with the technical requirements of the working environment. The operating voltage, current, frequency and level of the electrical co ...
The rated voltage and rated current of Wall Switch must match the power of the connected socket. If the power value of the socket is seriously inconsistent with the requirements, it will be overloaded ...
The price of cable accessories, whether it is heat shrink or Cold Shrink Cable Accessories, is a very critical point. Superior quality and preferential prices are used to open the cable accessories ma ...
During drop out fuse installation, the fuse tube axis must be maintained at an angle of 15-30° to the plumb line to ensure that the fuse drops rapidly due to gravity after melting, thereby improving s ...
When using High Voltage Disconnect Switch, since it does not have an arc extinguishing device, it is difficult for the switch to extinguish itself. The switch may even cause arcing (relative to ground ...
During the design and construction of Powbinet, all electrical components and installations must comply with the relevant safety regulations in the "Low-voltage Distribution Equipment and Line Design ...
Common issues that arise from improper use of the Wall Switch emergency number: Some bedside switches in bedrooms are left carelessly after use, causing the switch to bang against the bed frame or the ...
Regarding the price of Cold Shrink Cable Accessories, it actually has a very competitive advantage in the market. The specific transaction price will be measured based on many different factors such a ...
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.