Blog

Cold Shrink Cable Accessories does not require fire heating during operation, which is more convenient and greatly reduces the chance of fire. ...

The current amplitude directly affects the heat accumulation rate of the fuse drop out fuse. Experiments show that for every doubling of the current, the operating time is shortened to 1/4 of the orig ...

High Voltage Disconnect Switch After the operation is completed, check whether it is closed. After the isolating switch is closed, it should be completely inserted into the fixed contact and the tight ...

Including the current supply estimate of the stainless steel Powbinet industry market and the forecast of the future supply capacity of the stainless steel distribution box industry market. ...

As explained before joining the Wall Switch socket franchise, if the distribution board is not placed in the junction box, the moment the fuse is disconnected, overheated metal particles will continue ...

Cold Shrink Cable Accessorie has the advantages of small size, easy and quick operation, no need for special tools, wide application range and few product specifications. ...

6 times the rated current: The operating time is 0.1-0.5 seconds, meeting the requirements for quickly clearing typical short-circuit faults. 10 times the rated current or higher: The device enters th ...

However, do not use too much force when closing the High Voltage Disconnect Switch switch to avoid damaging the equipment, deforming the mechanism, or breaking the bottle. ...

According to the market environment, competitiveness and competitors of stainless steel Powbinet industry products, analyze and judge whether the products of this industry have a market within a limit ...

The wire core is exposed, in other words, water vapor continues to penetrate into it, causing a short circuit of Wall Switch, in other words, an arc occurs and a fire occurs when the switch is cut off ...

The biggest difference between Cold Shrink Cable Accessories and heat shrink cable accessories lies in the insulating tube inside the cable accessories. ...

The drop out fuse operating time exhibits an inverse time characteristic with respect to the fault current: 1.3 times the rated current: The operating time is between 60 and 120 seconds, intended to a ...

Whether operating High Voltage Disconnect Switch with a manual transmission or an insulated operating lever, it must be done quickly and decisively. ...

The Powbinet industry market analysis report is an analysis of survey data such as the market size, market competition, regional market, market trends and attractive scope of the distribution box indu ...

Wall Switch is not installed correctly, especially when the switch is placed on a flammable object. If the sheath of the wire is accidentally damaged, ...

Cold Shrink Cable Accessories is usually only available in gray on the market, while heat shrink cable accessories are available in various colors. ...

drop out fuse uses a double-layer arc-extinguishing tube (the inner layer is gas-generating ceramic and the outer layer is epoxy glass fiber). Under a short-circuit current of 20kA, its arcing time ca ...

And before operating High Voltage Disconnect Switch, make sure to check that the circuit breaker is in the off position before operating it. ...

The finished product of Powbinet should be free of oil stains and fingerprints. At least two threads should be exposed after the bolt is tightened. ...

The Project Wall Switch socket is parallel to the wall and very neatly without any slope. ...

Cold Shrink Cable Accessories does not require open flames or other tools to shrink. Heat shrink cable accessories require heating tools to complete the shrinkage. ...

The arc burning time, that is, the time it takes for the arc in drop out fuse to be completely extinguished in the arc extinguishing tube, is affected by the arc extinguishing medium and structural de ...

When operating High Voltage Disconnect Switc, you should pay attention to its operating sequence. When there is a power outage, pull the line side disconnector first. When power is restored, close the ...

The Powbinet fasteners are connected reliably and meet the torque requirements. No slipping or loosening is allowed. ...