Blog

Ambient temperature compensation ‌ For every 1°C increase in ambient temperature, the continuous load capacity of drop out fuse will decrease by 0.5% to 0.8%. In plateau areas (altitude > 1000 mete ...

It may cause arcing (phase-to-ground or phase-to-phase short circuit), burn equipment, and endanger personal safety. This is the so-called "load-pulling High Voltage Disconnect Switch" serious acciden ...

Opening and closing faults: This type of fault is caused by the circuit breaker body. For low-oil circuit breakers, it mainly manifests as oil injection short circuit, arc extinguishing chamber burnin ...

Wall Switch The location must be standardized. When installing wall sockets, most families think that it will be unsightly if the sockets are too high, so they will install them in relatively low and ...

Compared with prefabricated cable accessories, although Cold Shrink Cable Accessories relies on elasticity to ensure internal characteristics, it has many types and specifications, and is very diverse ...

In the case of instantaneous impacts such as motor starting, drop out fuse needs to be able to withstand a short-term overload capacity of 6 to 8 times the rated current. The design needs to be combin ...

The contacts of High Voltage Disconnect Switch are all exposed to the air and have obvious disconnection points. The high-voltage disconnector has no arc extinguishing device, so it cannot be used to ...

Survey statistics show that the main types of Power distribution cabinet faults are as follows: (1) Refusal to operate and malfunction: This type of fault is the most common fault in high-voltage swit ...

Never use the same hotel Wall Switch with multiple electrical appliances. This will overload the electrical appliances and may cause a major fire. Air conditioners, range hoods and other electrical ap ...

Compared with heat shrink cable accessories, there is no risk of internal accessory layers coming apart when moving or bending after installation, as with heat shrink cable accessories, because Cold S ...

Rated current and continuous load The load of continuous operation of drop out fuse mainly depends on its rated current parameters. Taking RW11 as an example, its rated current range is usually 10A-20 ...

High Voltage Disconnect Switch is mainly used to reliably isolate the part of the high-voltage distribution device that needs to be shut down from the live part to ensure the safety of maintenance wor ...

① For G-1 level places where explosive mixtures can be formed under normal circumstances, any level Power distribution cabinet of flameproof, explosion-proof ventilation, and inflatable type can be se ...

The top grounding hole of Wall Switch must be firmly connected to the grounding wire, tightly connected, and connected correctly. It must not be left unconnected. The remaining two holes are connected ...

The Cold Shrink Cable Accessories items are mainly divided into: shrinkable type and prefabricated type. It effectively makes up for some defects of heat-shrinkable cable accessories and prefabricated ...

In 10kV distribution network, drop out fuse is a crucial overload and short-circuit protection device, and its carrying capacity directly affects the safety and reliability of the power system. This a ...

Load switches, High Voltage Disconnect Switch, isolating switches, and circuit breakers all carry the rated current of the circuit in the primary circuit. In short, the circuit breaker is used to prot ...

① For Q-1 level places where explosive mixtures can be formed under normal circumstances, low-pressure Power distribution cabinet with flameproof, explosion-proof ventilation and inflatable type shoul ...

Wall Switch franchise says that it is best to use an independent refrigerator with a three-pin safety socket with protective grounding. You must not connect the grounding wire to the gas pipeline syst ...

Cold Shrink Cable Accessories is made of silicone rubber and other materials that are pre-expanded in the factory and added with plastic support strips. It is also very simple to use. You only need to ...

The action mechanism of drop out fuse is a complex process of electromagnetic-mechanical-thermal multi-physical field coupling, and its reliability depends on the precise matching of material properti ...

If the transmission system of High Voltage Disconnect Switch is corroded, the transmission resistance will increase significantly, and in severe cases, it may even refuse to separate or close. For exa ...

The protection type of low-voltage distribution box should be selected according to the conditions of the workplace. (i) In places with low risk where the relative humidity does not exceed 75%, there ...

It is best to unplug the socket when not in use, which not only ensures that electricity is not wasted, but also protects Wall Switch. As long as we are willing to pay attention and pay more attention ...