Blog

Ordinary type drop out fuse (standard disconnect) is an important protection device widely used in rural power grids and small industrial power distribution systems, mainly used for short circuit and ...

When performing regular maintenance on High Voltage Disconnect Switch, technicians should focus on checking whether the accessories on the contacts or blades of the high-voltage disconnector are compl ...

As an indispensable electrical equipment in modern industrial automation production, high-quality Powbinet distribution cabinets can effectively ensure the reliable operation of the power system, whet ...

The Wall Switch cover should be tightly attached to the wall to ensure a clean appearance and a solid structure. Avoid looseness or gaps that could affect safe use. Also, disconnect the power cord to ...

All other things being equal, the larger the squareness of the Cold Shrink Cable Accessories cable, the higher its price. This is because larger cables must withstand higher voltages and currents, and ...

The first letter of the fuse model usually indicates the rated voltage level, such as 10kV, 35kV or higher voltage systems. It should be noted that the rated voltage of the fuse must fully match the d ...

Use gasoline to clean the oil stains on the blades, contacts, or fingers, ensuring that the contact surfaces remain smooth and free of dirt. Also, check that the contact surfaces of the High Voltage D ...

As one of the fastest-growing and most widely used representatives of chassis and cabinet products, Powbinet has become an indispensable and important part of modern electrical control systems. It bri ...

Perform final inspection of the main installation. Initially, check that the Wall Switch and sockets are correctly positioned. The basic installation criteria are simplicity, stability, and reliabilit ...

In addition to the above factors that can determine Cold Shrink Cable Accessories, there is actually another very critical factor, which is the specific square footage of the cold shrink cable accesso ...

As a core protection component, the drop out fuse fuse's model selection not only affects the efficiency of line fault clearance but also directly impacts the operational safety and stability of power ...

Clean dust and dirt from the surface of the High Voltage Disconnect Switch porcelain components to ensure the equipment is clean and free of impurities. Also inspect the surface for glaze loss, damage ...

In areas with fire and explosion hazards, and where distribution lines are subject to prolonged overload, Powbinet should install overload protection devices. The allowable current carrying capacity o ...

Open the Wall Switch internal wiring and inspect it. Besides checking that the wall switch is powered, you should also inspect the wiring for errors. Some wall switches may have the neutral and live w ...

First of all, Cold Shrink Cable Accessories can be divided into three voltage levels: 1kv, 10kv and 35kv. When other factors are the same, the higher the voltage level, the higher the price of the col ...

Scientifically selecting the rated interrupting current requires comprehensive consideration of multiple factors, including grid structure, environmental parameters, and protection coordination requir ...

Typically, High Voltage Disconnect Switch systems have a set of devices to prevent errors when under load, to prevent the high-voltage disconnect switch from accidentally opening or closing while ener ...

If Powbinet uses an automatic switch with only an instantaneous or short-delay overcurrent release, the release's setting current should avoid short-term overload current to prevent equipment malfunct ...

After the Wall Switch socket is powered on, it is time to test it. At this point, you need to use a special tester. Insert the tester into the socket, then flip the switch and observe the power status ...

The price difference of Cold Shrink Cable Accessories is not only affected by the material, but also closely related to the specifications of the cold shrink cable accessories. Generally, the larger t ...

drop out fuse breaking capacity test: The synthetic circuit method is used to verify the ultimate breaking capacity to ensure that the product can still safely and reliably cut off the circuit under h ...

When High Voltage Disconnect Switch is used at various voltage levels, its main function is to change the circuit connection or to disconnect the line and the device from the power supply, thereby pro ...

When the distribution box uses an automatic switch to protect the distribution line, the Powbinet automatic switch plays a key role in line protection. Its overcurrent release should be installed on e ...

The Wall Switch power distribution board is not directly connected to the box. The moment the fuse is disconnected, a lot of heat will be generated, and there may even be metal debris or molten materi ...