Blog

The core parameter of drop out fuse protection performance is its operating time, which covers the pre-arcing time (fuse melting stage) and arcing time (arc extinction stage). ...

High Voltage Disconnect Switch has obvious segmented gaps, so it is mainly used to isolate high-voltage power supplies, ensure safe maintenance, and can switch on and off certain small currents. ...

The flatness of the bottom and other sides of the Powbinet cabinet, and the perpendicularity of the front, back, left, and right sides of the cabinet relative to the bottom are all 1mm. The parallelis ...

The base of any product sold by Wall Switch is clearly marked with the trademark and nationally recognized certificate, as well as the 3C certification identification code. ...

Cold Shrink Cable Accessories can make the finished product have the advantages of easy and quick installation, no need to use open flames, and high elasticity during construction operations. ...

High-breaking type drop out fuse is suitable for industrial-intensive areas. It has a breaking capacity of 20kA and is suitable for scenarios with large short-circuit current fluctuations. ...

According to the installation location of High Voltage Disconnect Switch, it can be divided into indoor type and outdoor type. According to the number of insulating pillars, it can be divided into sin ...

Powbinet Doors that require opening and closing must rotate flexibly, have good adsorption after closing, and must not cause any damage to the coating during rotation. Side doors should be flexible to ...

Feel the weight of Diudiu Wall Switch. It is slightly heavier due to the excellent shell insulation material, high-quality buttons, and the brightness of the current-carrying copper sheet. ...

The voltage level of Cold Shrink Cable Accessories is also 1 kV, and it is also a type of cable accessories. "Cold shrink" is made of silicone rubber and undergoes a series of processing techniques. ...

The rated breaking current of drop out fuse must not be lower than the maximum expected short-circuit current of the system. ...

High Voltage Disconnect Switch can isolate voltage, but cannot be used to cut off, input load current and interrupt short-circuit current. It can only be used for certain switching operations that do ...

The revolving door panel of Powbinet has no obvious sagging or warping phenomenon, and the absolute value of the difference between the same gap at different locations is ≤1.8mm. ...

The Wall Switch feels nice and light, and it's quick to respond. The socket itself has a protective door, and plugging and unplugging is smooth, though there's a slight pinch when you plug it in. ...

Moreover, Cold Shrink Cable Accessories does not require the use of open flames like heat shrink cable accessories. This is safer and greatly reduces the risk of fire. ...

The adjustment of the rated current of drop out fuse must follow the following rules: for every increase of 1000 meters, it must be adjusted according to the standard of 4% reduction in capacity. ...

The main function of High Voltage Disconnect Switch is to ensure the safety of high-voltage electrical appliances and devices during maintenance work and to isolate the voltage. ...

The front, back, left, and right doors of the Powbinet cabinet must not be twisted. After the door panels are assembled, the parallelism between the outer surface and the side of the cabinet in which ...

The Wall Switch agent said that the live wire, neutral wire and ground wire on the terminal blocks of its products are clearly marked. ...

Cold Shrink Cable Accessories is easy to operate and requires low technical skills for installation. We only need to gently pull out the support bar to quickly shrink and wrap the cable. ...

When the altitude exceeds 1000 meters, the air density will decrease, resulting in a weakening of the heat dissipation capacity of drop out fuse. ...

High Voltage Disconnect Switch is an important switchgear in the electrical system of power plants and substations and must be used in conjunction with high-voltage circuit breakers. ...

The parallelism of the working surface of the slide supporting the plug-in box relative to the upper surface of the base is 1mm, ensuring that the absolute value of the difference in the gap between t ...

Observe the appearance of Project Wall Switch: The appearance of the socket must be smooth and without protrusions, and it can be easily fixed on the wall. There must be no tilt or unevenness. ...