What Are The Steps To Test Contact Problems On Wall Switches And Sockets?

A wall switch is an electrical switch installed on the wall. It is mostly used to connect and disconnect circuits and control the switch of lighting. If there is a problem with the wall switch socket or a contact problem, how should we test it?

The steps to test the contact problem of the Wall Switch socket are as follows:

1. Manually open the surface of the switch socket and quickly separate the shell and the pin board. At this time, you must accurately record the position and direction of each contact piece, remove the damaged contact piece, and replace it with a new contact piece.

2. Install the switch as it was originally, and use a multimeter to check whether the switch is fully connected. Then you can install the switch socket back to the original circuit.

3. If there is no suitable contact, you need to try to modify it to make it reach the size value of the original contact piece.

When testing the contact of the wall switch socket, we can test it according to the above method, hoping to help everyone.