How To Install The Power Distribution Box?

High And Low Voltage Distribution Cabinets How to install?

1) The distribution box should be made of non-combustible materials.

2) Open distribution boards can be installed in production sites and offices with low risk of electric shock.

3) Closed cabinets should be installed in processing workshops, castings, forgings, heat treatments, boiler rooms, woodworking rooms and other places with high risk of electric shock or poor working environment.

4) Enclosed or explosion-proof electrical facilities must be installed in dangerous workplaces with conductive dust or flammable and explosive gases.

5) The electrical components, instruments, switches and lines of the distribution box should be arranged neatly, installed firmly and easy to operate; there should be no dust, water and debris in the cabinet (box).

6) The bottom surface of the floor-mounted cabinet (box) should be 50~100 mm above the ground; the center height of the operating handle is generally 1.2~1.5m; there are no obstacles within 0.8~1.2m in front of the cabinet (box).

7) The protective line connection is reliable.

8) No bare live parts shall be exposed outside the cabinet (box); electrical components installed on the outer surface of the cabinet (box) or on the distribution board must be reliably shielded.