High voltage cold shrink cable accessories
The heat shrink cable terminal head of Cold Shrink Cable Accessories is made of PE material. When heating, it is necessary to use a heating tool to heat it so that it shrinks and tightly wraps around the cable sheath to achieve the insulation protection of the cable. When heating, you also need to pay attention to avoid direct heating of the cable terminal head for a long time, causing the cable terminal head to be burned or cracked.
The cold shrink cable terminal head of the high-voltage cold shrink cable accessories is made of silicone rubber. When using it, it does not require heating or other auxiliary tools. You only need to extract the plastic support strip inside, and it will shrink and reset naturally.
Whether it is heat shrink or cold shrink, the models of high-voltage cold shrink cable accessories are based on the applicable square number of cables. The applicable square numbers of heat shrink and cold shrink of 10kv cable terminal heads are the same, all of which are: 1# (25--50) square, 2# (70--120) square, 3# (150--240) square, 4# (300--400) square. The applicable square number of cables for the heat shrinkable terminal head of the 35kv cable terminal head is: 1# (50--120) square, 2# (150--240) square, 3# (300--500) square; the applicable square number of cables for the cold shrinkable terminal head of the 35kv cable terminal head is: 1# (50--95) square, 2# (120--185) square, 3# (240--400) square, 4# 500 square.
After introducing the two materials of high-voltage cold shrink cable accessories and their respective applicable square numbers of cables, let's talk about what the material packages in their complete terminal set are. The heat shrink package of the high-voltage cable terminal head is equipped with a constant force spring, gloves, cleaning paper, sandpaper, silicone grease, and conductive tape; the cold shrink package of the high-voltage cable terminal head is equipped with J-20 insulating self-adhesive tape, BDD-20 semi-conductive self-adhesive tape, copper wire, Band-Aid, small tape measure, utility knife, sandpaper, PVC winding tape, conductive tape, cleaning paper, gloves, silicone grease, cable cleaning paper, and triangular cone.
