Cold Shrink Products
Cold shrink products are injection-vulcanized and molded in the factory using elastomeric materials such as silicone rubber and ethylene propylene rubber, and then expanded and lined with plastic rotating supports to form various products. There are many types of products, mainly including cold shrink cable accessories, cold shrink insulation tubes, etc. During on-site installation, you only need to pull out the plastic support strips of the internal support to shrink it on the object that needs insulation protection, thereby achieving the effect of insulation protection. Therefore, cold shrink products do not shrink when they are cold. Compared with heat shrink products, they do not need to be heated to shrink, and are more convenient and simple to use. Cold shrink products are now being used by more and more customers, but compared with everyone's understanding of the correct installation and use of heat shrink products, cold shrink products are far from reaching it, so it is inevitable that some minor problems will occur during installation and use, affecting installation and use.
The following summarizes a few tips for Cold Shrink Cable Accessories in installation and use, so that everyone can install and use it correctly.
1. When using cold shrink products, try to avoid touching sharp objects, because the material of cold shrink products is silicone rubber, which has good elastic insulation properties. Sharp objects can easily cause scratches on the surface of the product, thereby affecting the quality of the product.
2. Cold shrink products are all expanded on the support, and the use is to extract the support, so we should pull slowly and gently when using it to avoid the support from breaking and being unusable due to excessive force and pulling too wide, especially when just extracting it, we should be more careful.
3. When using cold shrink products, because the supports all have solder joints, solder joints are tapped to prevent the supports from falling apart, so when using them, the solder joints can be processed first, so that it is easier to extract when using them, which is conducive to installation.
4. The installer must carefully read the operating instructions provided by the manufacturer before using the product, which is also very important.
The above is all about cold shrink products. Customers are welcome to call for consultation on related cold shrink products and ask about the installation and use of cold shrink products and other related issues.
